Have a question that doesn't fit into any of the other categories?

Post it here, and we'll try to answer it!

Permalink Reply by Knit Picks Admin on March 26, 2009 at 9:42am: Linen and silk yarns sometimes like to jump off of the ball winder when you're using it because they are slick. If you wind the yarn more slowly, it won't jump off.; ▶ Reply to This

Permalink Reply by remcat on March 27, 2009 at 7:14am: I'm having trouble getting my new ball-winder to work properly. I was wondering if there is a video of someone using it? The problem I'm having is that the incoming yarn will "catch" on the edge of the saucer-shaped edge, and then slide underneath the whole thing and wind in the wrong place. This happens more often as the ball gets bigger. I was trying to wind up a 50-gram ball of WotA -- is that too much yarn?; ▶ Reply to This

Permalink Reply by Knit Picks Admin on March 27, 2009 at 7:17am: We do have a video! You should be able to wind a 50g ball of WotA with no problems, so let us know if you're still having trouble after watching the video.; ▶ Reply to This

Permalink Reply by remcat on March 27, 2009 at 9:07am: Aha! The video made all the difference. I realized that I had not moved the metal guide out of the "storage" position -- it works much better when the metal guide is in the proper orientation. Thank you!! :).; ▶ Reply to This

Permalink Reply by Lynn Herrin on March 30, 2009 at 5:02pm: I would like to know if I have a sock pattern that calls for sportweight yarn and size 4 needles, can I use fingering weight and size 2 or 3 needles and get the same size sock?; ▶ Reply to This

Permalink Reply by Susan the Blue Lake Knitter on March 30, 2009 at 5:13pm: There should be a notation on the pattern you are using that tells you the gauge for that pattern. If you can obtain the same gauge with the fingering weight yarn and the size 2 or 3, than probably yes.; ▶ Reply to This

Permalink Reply by Peggy Stuart on March 30, 2009 at 6:26pm: Lynn: I agree with Susan, but with one caveat--If you use fingering weight for the pattern and can get gauge with your needles, you will end up with the same size sock, but it will be very loosely knit and probably will not wear well. I would recommend:
1) switching to the size yarn called for in the pattern, or
2) changing to a completely different pattern, or
3) adapting the pattern to deal with more sts.
With most sock patterns, you can check to see how many sts in the repeat (four, five, six...) and adding that number again and again until you get enough sts to go around your foot with the gauge you get with your yarn and needles. Make your heel with about half the sts (for a traditional sock). If you have a traveling st that moves across the entire sock, you can look at the pattern and try to find a place to add the additional sts. Charlene Schurch's Sensational Knitted Socks has charts for a number of different repeats in a wide range of sizes and gauges, so you can just look up what you get with YOUR yarn and YOUR needles. Then you can use 4 or 5 dpns or 2 circs (which is also adaptable for ML). Good luck! --Peggy; ▶ Reply to This

Permalink Reply by Irish Knit on April 1, 2009 at 1:22pm: I have a question about winding hank yarn into a ball via a ball winder.
Need Help.

I have purchased my first lot of lace weight yarn, they are in HANK form. I never wound yarn, but I will learn now.

Will the entire hank fit on a ball winder, 400 some yards, it would seem not to, but I don't know. If the entire hank doesn't fit, at what point should you stop and break the yarn, in order to start the new ball?

I guess I am wondering, how much yarn does a ball winder hold that is lace weight. I am using the KP ball winder. No I don't have a swift.; ▶ Reply to This

Permalink Reply by Susan the Blue Lake Knitter on April 1, 2009 at 1:26pm: I was able to wind the entire hank into a ball on the ball winder without any problem. The lace weight yarn is very fine, and will fit without queston.; ▶ Reply to This

Permalink Reply by Irish Knit on April 1, 2009 at 1:53pm: Thanks so much for the response.; ▶ Reply to This

Permalink Reply by Susan the Blue Lake Knitter on April 1, 2009 at 2:00pm: No problem... that is what we are here for.. to help one another whenever we can. Maybe one day you will have the exact piece of info that I need.; ▶ Reply to This

Permalink Reply by Stephanie Fifield on April 3, 2009 at 7:21pm: I am using Merino Style to knit a sweater vest for my DH. I have been knitting about 3 years, and definitely have a grip on stockinette stitch. The weird thing is that my swatch seems horizontal ribbed, more so on the purl side. I have not had this problem before and I wondered if anyone else has told you about this sort of problem.; ▶ Reply to This